Best Safety Rated Infant Car Seat

Best Safety Rated Infant Car Seat helps keep children safe. Every year large amount of children die or have injuries in car accident.  However, in the market, it is not as extravagant as for many parents. If you are a parent expecting a child, take enough time to learn how to install the car seat properly. The type of infant safety car seat your child needs depends on many factors, including the age and size of your baby, and the type of car you have to continue reading for more info from the American Academy of Pediatrics on how to choose the best safety rated infant car seat for your child.

Jump to the Product List

Best Safety Rated Infant Car Seat Comparison

Image	Product Name	Our Rating	Current Price
	Chicco KeyFit Infant Car Seat	5.0	Check Here
	Graco SnugRide SnugLock 35 Infant Car Seat	5.0	Check Here
	Maxi-Cosi Mico Max Plus Infant Car Seat	5.0	Check Here
	Chicco Fit2 Infant & Toddler Car Seat	4.9	Check Here
	Britax B-Safe 35 Infant Car Seat	4.9	Check Here
	Peg Perego Primo Viaggio Infant Car Seat	4.9	Check Here
	Evenflo LiteMax DLX Infant Car Seat	4.8	Check Here
	UPPAbaby MESA Infant Car Seat	4.8	Check Here
	Safety 35 Air 360 Infant Car Seat	4.8	Check Here
	CYBEX Aton 2 Infant Car Seat	4.7	Check Here

Note:

Seatbelts, if you install a car safety seat using the seat belt of your vehicle, you must ensure that the belt locks to obtain a proper fit. On most new cars, you can lock the seat belt by pulling it completely and then allow it to retract to keep it tight around the car safety seat. In addition, many of the car safety seats have built-in locks to lock the belt independently, without having to lock the seat belt. Consult the vehicle owner’s manual for details on how your safety belt is locked.

The middle rear seat:

The safest place for all children under 13 years of age to travel is in the back seat. If possible, it is better to travel in the middle of the back seat. However, it is sometimes difficult to install a car safety seat in the middle of the vehicle seat is narrow or uneven.

In addition, most vehicles do not have lower anchors to place the seat in the middle of the rear seat. It is safest to place the car safety seat in a position where you can install it firmly with the lower anchor system or seat belt; In some cases, this could be on either side of the back seat, rather than in the middle. The child passenger safety technician can help you decide the best place to install your child’s car safety seat in your vehicle.

Rear-facing seats for babies and small children

The AAP recommends that all babies travel backward from their first trip home from the hospital. All infants and toddlers should travel in a car seat for as long as possible until they have reached the Maximum weight or height allowed by the manufacturer of your best safety rated infant car seat. Best convertible car seats have limits that allow children to travel backward for 2 or more years.

All parents can benefit from the help that the technicians offer to make sure that the safety seat has been installed correctly.

Types of rear-facing seats:

There are three types of rear-facing seats available: rear-facing only, convertible and 3-in-1.

• When children reach the maximum weight or height allowed by the manufacturer of their rear-facing seat only, they should continue to travel backward in a convertible seat or in a 3-in-1 seat.
• Rear-facing seats only
• Used for babies up to 22 to 35 pounds (9.9 to 15.8 kg), depending on the model.
• They are small and have handles to load them.
• They usually come with a base that can be left in the car. The seat is inserted into the base and removed from it, so it is not necessary to install it every time you use it.
• Parents can buy more than one base to place in other vehicles.
• They should only be used for travel (not for sleeping, eating or for any other use outside the vehicle).
• Convertible seats (used rear-facing)
• Many have higher weight limits (up to 40 or 50 pounds) and height than rear-facing seats only, which makes them an ideal choice for larger babies and toddlers.
• They have a 5-point harness that is fixed on the shoulders, hips and between the legs.
• They should only be used for travel (not for sleeping, eating or for any other use outside the vehicle).

3 in 1 seat (used facing rearward)

• Can be used facing backward, forwards or as elevators for belt position.
• This means that your child can use the seat longer while growing up.
• They are usually larger, so it is important to check that they enter the vehicle facing backward.
• They do not have the convenience of a handle to carry them or a separate base; however, they may have upper limits for weight (up to 40 or 50 pounds) and height oriented backward than rear-facing seats only, which makes them ideal for larger babies and toddlers.

Installation tips for rear-facing seats:

• Always read the owner’s manual of the vehicle and the car seat manual before installing the seat.
• When using a rear-facing seat, remember the following tips:
• Place the harnesses of your seat facing backward in the slots located at or below your baby’s shoulders.
• Make sure that the infant car safety seat is firmly installed with the LATCH system or a safety belt locked. If you can move the seat via the belt more than an inch from side to side or from front to back, it is not tight enough.
• Never place a rear-facing seat in the front seat of a vehicle that has an active airbag in the passenger seat.
• If the airbag inflates, it will hit the back of the car safety seat, right where your baby’s head is and could cause serious injury or death.
• If you use a convertible or 3-in-1 seat in the rear-facing position, make sure that the seatbelt or the lower anchor is anchored in the correct belt path.

Consult the instructions for the best safety rated  infant car seat for added safety.

• Make sure the seat is at the correct angle so that your baby’s head does not go forward. Consult the instructions to know the correct angle for your seat and how to adjust the angle if necessary. All rear-facing seats have built-in angle indicators or adjusters.
• Review the instructions for the car safety seat and the vehicle owner’s manual to see if the car safety seat can touch the seat back of the vehicle in front of it.best
• Still, have problems? Contact a certified child safety technician (CPST) in your area who can help you. If you need help with installation, see the section at the end of this publication for information on how to locate a CPST.

Common questions about rear-facing seats:

What happens if my baby’s feet touch the back of the vehicle seat?

• This is something that worries parents very often, but should not. Children can bend their legs easily and will feel comfortable in a rear-facing seat. Injuries to the legs are very rare in children facing backward.

What do I do if my baby slides down or sideways in the car safety seat? You can try placing small rolled blankets on both sides of your baby. Many manufacturers allow you to place a tightly wrapped diaper or cloth (the small piece of cloth) between the crotch strap and your baby if necessary to prevent it from slipping. Do not place padding under or behind your baby or use attachments for the car safety seat unless they are supplied with it or that have been manufactured specifically for that seat.

• Why should I dress my baby with thinner layers of clothing before placing it in an infant car safety seat?

Bulky garments,

such as winter coats and snowsuits, can contract in an accident and leave straps too loose to hold your child, with an increased risk of injury. Ideally, dress your baby in thinner layers of clothing and cover or wrap with a coat or blanket over the harness straps fastened if necessary. See AAP tips for safe use of car seats in the winter.

• Do premature babies need a special car seat?
• An infant safety car seat must be approved for the weight of a baby. Very small babies who can sit securely in a semi-reclined position usually fit better in only rear-facing seats. They should be tested with premature babies while they are in the hospital to make sure they can sit safely in a semi-reclined position. Babies who need to go to bed while traveling must travel in a car bed that complies with the Federal Motor Vehicle Safety Standard 213. They should be tested while they are in the hospital to make sure they can lie down in a safe manner. safe in the car bed.
• Forward-facing seats for toddlers and preschoolers
• Always read the owner’s manual of the vehicle and the car seat manual before installing the seat. Any child who has exceeded the weight limit of their rear-facing safety seat or the height limit for their convertible seat should use a forward-facing safety seat with a harness as long as possible, up to the maximum weight or height allowed by the manufacturer of your car safety seat. Ideally, children travel in seats with harnesses as long as possible, at least until 4 years of age. If your child is larger than a seat before reaching age 4, consider the possibility of using a seat with an approved harness for higher weights and heights.

Types of fasteners for seats facing forward

• Four types of fasteners can be used for vehicle safety in forward-facing seats:
• Convertible seats: Seats that can convert from rear-facing to forward-facing.
• Among these are the 3 in 1.
• Combination seat with harness: The seat can be used forward facing with a harness for children weighing up to 40 to 90 pounds (depending on the model). Without the harness as an elevator (up to 80 to 120 pounds, depending on the model).
• Built-in seats: Some vehicles have built-in forward-facing seats. The limits of weight and height vary. However, do not use built-in seats until your child is at least 2 years old. Read your vehicle owner’s manual for details on how to use these seats.
• Travel vests: Can be worn by children between 20 and 168 pounds and can be an alternative to traditional forward-facing seats. They are useful when a vehicle has safety belts only for the lap in the back seat, for children with special needs or for children whose weight has exceeded that allowed by car safety seats. These vests may require a top tier.

Installation tips for forward-facing seats:

Always read the owner’s manual of the vehicle and the car seat manual before installing the seat. It is important that the car safety seat is firmly installed in the vehicle and that the harness fits your child.
• To change a convertible seat or 3 in 1 from rear facing to forward facing:
• Move the shoulder straps to the slits that are located above or above your child’s shoulders. In some convertible seats, the upper harness slots should be used when facing forward. Refer to the instructions supplied with the seat for safety.
• You may need to adjust the recline angle of the seat so that it is more upright in your vehicle. Consult the instructions for greater safety.
• If you use a seat belt, make sure it runs in the forward-facing belt path (follow the instructions on the infant safety car seat) and that the safety belt is locked and firm.

If

• you are going to use the lower anchors, make sure that the child’s weight plus the weight of the seat does not exceed 65 pounds. Most seats now say the child’s maximum weight to use the anchors. Both in the manual and in the stickers on the sides. If the child weighs too much, families must use the seatbelt for installation.
• Use the upper strap whenever possible. This strap attaches to the top of a infant safety car seat and keeps the seat firm by connecting to an anchor point in your vehicle (often located in the backrest of the seat or on the back shelf, see the owner’s manual of your vehicle to know where the restraint straps are in your vehicle).
• Belts provide important additional protection. As they prevent the infant safety car seat and your child’s head from moving too far forward in a crash or sudden stop. Since September 2000, it is mandatory that all new cars, minivans, and vans have tether straps. The forward-facing seats come with tether straps. Until your child has reached the upper limit of weight for anchoring the tie, you must use the strap.

• Refer to the instructions for the infant safety car seat and the car owner’s manual for information on the maximum weight limit and the locations of the restraint straps.

Common questions about forward-facing seats:

What happens if I carry more children than can be safely buckled in the back seat?

It is best to avoid it, especially if your vehicle has an airbag (airbag) in the front seat. All children under 13 years of age should travel in the back seat. If absolutely necessary, the best option to travel in the front seat is to transport the child in a seat facing forward, with a harness. Make sure that the vehicle seat is as far away from the board as possible and the airbag.

What should I know if someone else is going to take my child, as in the case of daycare or school?

If someone else takes your child, make sure that:

Move the shoulder straps to the slits that are located at or above your child’s shoulders. That is located on the child’s shoulders or as close to them as possible (above or below). Depending on whether the seat is facing backward or forwards). Refer to the instructions supplied with the seat to make sure you are positioning the shoulder straps correctly.

The infant safety car seat that your child will use fits well in the vehicle used for transportation.

The infant safety car seat that is used is appropriate for the age and size of your child.

The person in charge of transporting your child

Daycare programs and schools should have written guidelines for transporting children; among others that:

All drivers must have a valid driver’s license. In some states, school bus drivers must have a special type of license.

The relationship between children and staff for transportation must meet or exceed the relationship required for the classroom.

All children must be supervised during transportation, either by school personnel or by a parent volunteering. So that the driver can concentrate on driving.

School personnel, teachers and drivers should know what to do in an emergency, how to properly use infant safety car seat and seat belts, and keep other safety requirements in mind.

Does my child have to travel in an infant safety seat on an airplane?

The Federal Aviation Administration (FAA) and the AAP recommend that when flying, children under 40 pounds are well insured with certified belts for children. This will help keep them safe during takeoff and landing and in case of turbulence. Most forward-facing, convertible and forward-facing seats can be used on aircraft. Lifting chairs and travel vests, no.

Read the instruction manual for your seat and look for a label on the infant safety car seat that says: “This strap is certified for use in motor vehicles and aircraft.” You can also consider the option of using a belt made only for aircraft use and approved by the FAA. Older children can use the seat belt of the plane or continue to use their car safety seat on the airplane as long as they have the label for use on airplanes and the child has not exceeded the weight limit or seat height. Remember that your child will need to use a

Safety seat for the appropriate car when it arrives at the destination.

Lifting chairs for school-age children:

The booster seats are for older children who are too large to travel in their forward facing seats. All children whose weight or height exceed the limit of their forward-facing seats should use a booster seat adjusted with the belt until the seat belt of the vehicle fits them well. Which usually happens when the child reaches 4 feet and 9 inches of stature, between 8 and 12 years of age. Most children will not fit in almost any of the vehicle’s seat belts without a booster seat until they are 10 or 11 years old. All children under the age of 13 must ride in the back seat.

The instructions included with your infant safety car seat will tell you the weight and height limits for the seat.

As a general guide, a child is too big for a forward-facing seat in one of the following situations:

Reach the maximum weight or height allowed for your harness seat (These limits are explained on the seat and are also included in the instruction booklet). His shoulders are above the upper slits of the harness. The upper part of the ears is at the level of the upper part of the seat.

 Types of lifting chairs:

There are two types of booster seats available, with high backrest and no backrest. These are not supplied with harness straps but are used with the lap and shoulder belts of your vehicle, just like when adults travel. They are designed to elevate a child so that the lap and shoulder belt fits well over the strongest parts of the child’s body.

Most booster seats are not secured to the vehicle with the belt or lower anchor. But simply rest on the car seat and remain in place once the seat belt is fitted over a child. However, some models of booster seats can be secured to the vehicle seat. And secured by the lower anchors or the upper strap. (Very few vehicles manufactured today come with built-in lift chairs).

Tips for the installation of lifting chairs:

When using a booster seat, always read the owner’s manual of the vehicle and the car seat manual before installing the seat. The lift chairs usually have a plastic clasp or guide to properly position the lap and shoulder safety belt of the car. See the instruction booklet that comes with the lift chair for instructions on how to use the pin or guide.

• Lift chairs should be used with lap and shoulder belts. When using a lift chair, make sure that:
• The lap belt is low and tight against the top of your child’s thighs.
• The shoulder belt passes through the middle of your child’s chest and shoulder and does not remain on the neck.
• If your booster chair has lower anchors or upper strap attachments, review the installation instructions in the manual.

Common questions about lift chairs:

What happens if my car only has lap belts in the back seat?

• Lap belts work well with rear-facing seats only. Convertible and forward facing, but they can never be used with a booster seat. If your car only has lap belts, use a forward-facing seat that has a harness and larger weight limits.
• It could also:
• Check if you can install shoulder belts in your car.
• Wear a travel vest (some can be used with lap belts).
• Consider the possibility of buying another car with lap and shoulder belts in the back seat.
• What is the difference between high-backed lift chairs and those without backup?
• Both types of booster seats are designed to elevate your child so that the seat belts hold him or her properly. And both reduce the risk of injury to your child in a crash. High-backed booster seats should be used on vehicles that do not have headrests or that have low seat backrests. Many seats that look like high-backed lift chairs are, in fact, combo seats that are supplied with harnesses that can be used for younger children and then removed for older children. Backless lift chairs are usually cheaper and easier to move from one vehicle to another. Booster seats without backrest can be used safely in vehicles with head restraints and with high backrests in the seats.

 Safety belts for older children

Safety belts are manufactured for adults. Children must remain in a booster seat until they are adequately restrained by the adult seat belt. Usually when they reach 4 feet 9 inches tall, between 8 and 12 years of age. Most children will not fit in a seat belt alone until they are 10 or 11 years old. When children are of sufficient age and size to use the vehicle’s seat belts alone, they should always use lap and shoulder belts for the best protection. All children under 13 years of age must travel in the back seat.

• Use of the seat belt
• The safety belt for adults adjusts well when:
•  The shoulder belt rests on the middle of the chest and shoulder, not the neck or throat.
• The lap belt is low and tight against the upper part of the thighs, not in the stomach.
• Your child is tall enough to sit up against the back of the seat with the knees bent comfortably. Over the edge of the seat without stopping and can stay in this position comfortably throughout the trip.

Other points to remember when using safety belts:

Make sure your child does not put the shoulder belt under his arm or behind his back.

• This leaves the upper body unprotected and leaves the belt system looser, putting your child at risk of serious injury in the event of a crash or sudden braking.
• Never allow anyone to “share” the belts. All passengers must have their own seats or seat belts.

Common questions about the safety belt:

I have seen products that say they help the belt fit better. Should I buy them? No, these products should not be used. In fact, they could interfere with the proper fit of the belt, causing the lap belt to be too high in the stomach or the shoulder belt to be too loose. They can even damage the belt. This rule also applies to car safety seats; Do not use additional products unless they are supplied with the seat or are specifically approved by the seat manufacturer. These products are not covered by any of the federal safety standards, and the AAP does not recommend their use.

•  While children are traveling with the appropriate restraint for their size, no additional devices should be used.

 How to buy infant safety car seat: tips for parents

When looking for best safety rated infant car seat, remember the following tips:

• No seat is the “best” or the “safest”. The best seat is the one that fits the size of your child, is well installed, fits well in your vehicle and is used properly every time you drive.
• Do not decide only for the price. A higher price does not mean that the seat is safer or easier to use.
• Avoid used seats if you do not know the origin of the seat.

Never use an infant safety car seat that:

Be too old. Look for the manufacturing date on the label. Check with the manufacturer to find out how long the use of the seat is recommended.

• Have visible cracks.
• Do not have a label with the date of manufacture and the model number. Without this data, you can not find out if the seat has been removed from the market.
• Do not bring instructions. You need them to know how to use the seat.
• Missing parts. Car seats used for automobiles often lack important parts. Check with the manufacturer to make sure you can get the correct parts.
• It has been withdrawn from the market. You can find out by calling the manufacturer or by contacting the Amazon
• Do not use seats that have been involved in a moderate or severe crash. Seats that have been involved in a minor crash may still be safe to use. But some seat manufacturers recommend changing seats after any crash, even a minor one.

The Amazon considers that a collision is minor if it complies with all the situations mentioned below:

The vehicle could be driven from the accident site.

• The door of the vehicle closest to the car safety seat was not damaged.
• None of the passengers in the vehicle was injured.
• The airbags were not activated.
• No damage is seen in the car safety seat.
• If you are not sure, call the seat manufacturer.
• About airbags (airbags)

All new cars have front airbags installed.

When used with seat belts, airbags work well to protect teens and adults. however, airbags can be very dangerous for children, especially those in rear-facing seats. And for preschoolers and children who have just started school who are not properly restrained. If your vehicle has an airbag for the front passenger, babies in rear-facing safety seats should ride in the back seat. Even in a relatively low-speed crash, the airbag can inflate, hit the car safety seat and cause serious brain damage and death.

• Vehicles without a rear seat or with a rear seat that is not made for passengers are not the best option for traveling with small children. However, the airbag can be disabled in some of these vehicles, if the front passenger seat is needed for a child. Consult your vehicle owner’s manual for more information.
• Most new cars have side airbags installed. Side airbags improve the safety of adults in side-impact crashes. Consult your vehicle owner’s manual for more information about the vehicle’s airbags. Read the instructions for your car safety seat and your vehicle owner’s manual for guidelines on seat placement next to a side airbag.

 Important points to remember:

•  Set the example. Be sure to always use your seat belt. This will help your child form the habit of wearing the belt for his whole life.
•  Ensure that all persons transporting your child use the correct car safety seat or seat belt on all trips, at all times. Being consistent in the use of the infant safety car seat demonstrates good parenting, reduces protests and complaints, and is the safest for your child.
• Never leave your child alone in or near cars and secure the car when it is not in use. When the baby is left alone in or near a vehicle, any of the following situations may occur.
• Die from a heat stroke, because temperatures can reach deadly levels in a few minutes.

Being strangled by power windows, retractable seat belts, sunroofs or accessories.

Actuate the vehicle’s gear lever and set it in motion.

Being run over when the vehicle backs up.

Get stuck in the trunk of the vehicle.

Always read and follow the manufacturer’s instructions for your infant safety car seat.

• If you do not have them, write or call the company’s customer service department. You will be asked for the model number, the name of the seat and the date of manufacture. The manufacturer’s address and telephone number are on a label on the seat. Also be sure to follow the instructions in your vehicle owner’s manual related to the use of car safety seats. Some manufacturers’ instructions may be available on their websites.
• The registration card that is supplied with the car seat. You can also register your seat on the manufacturer’s website. It will be important in case the market seat should be removed.

While the American Academy of Pediatrics is not an organization for testing or setting standards. This publication sets out the recommendations of the AAP based on the peer-reviewed literature available at the time of publication. And establishes some of the factors that parents should consider before choosing and using a car safety seat.