Best Tailgate Light Bars – Powerful Light Bars Review
Tailgate light use for additional light bars that will increase your truck visibility and appearance. Tailgate light bars have LED strips that set up in the above rear bumper and below the door. These light bars are uses for brake lights, signal lights, or increase the visibility of your truck. These light bars are extra addition in any type of pickup truck. Tailgate light bars can give your truck an attractive and stylish appearance. Usually, LED tailgate light bars to provide one to three rows of unique light. This tailgate light bare is easy to install with some DIY steps. In these details, we provide a buying guide and review of the best tailgate light bars for a pickup truck.
- Best Tailgate Light Bars Comparison
- 1. OPT7 60″ Redline Triple LED Tailgate Light Bar
- 2. Tailgate Light Bar, DJI 4X4 60 Inch QUAD Row Truck Bed LED Strip
- DJI 4X4
- 3. OPT7 48″ Redline Triple LED Tailgate Light Bar w/Sequential Amber Turn Signal
- 4. MICTUNING 60 Inch 2-Row LED Truck Tailgate Light Bar Strip
- MICTUNING 60 Inch 2-Row LED Truck Tailgate Light Bar
- 5. AMBOTHER 5-Function 48″/49″ Truck Tailgate Side Bed Light Strip Bar
- 6. Partsam 48″ Truck Tailgate Red/White LED Light Bar
- 7. Nilight TR-01 Truck Tailgate Bar 60″ 108 LED Strip with Red Brake
- How to Buy Best Tailgate Light Bars – Buying Guide
- Installation Process
- Objective to Use
- Water Resistant Tailgate Lights
- Length of Light Bars
- Strength & Durability
- Final Verdict
Best Tailgate Light Bars Comparison
|Image||Product Name||Editor Rating||Current Price|
|OPT7 60" Redline Triple LED Tailgate Light Bar||5.0||Check Here|
|Tailgate Light Bar, DJI 4X4 60 Inch QUAD Row Truck Bed LED Strip||4.9||Check Here|
|OPT7 48" Redline Triple LED Tailgate Light Bar w/Sequential Amber Turn Signal||5.0||Check Here|
|MICTUNING 60 Inch 2-Row LED Truck Tailgate Light Bar Strip||4.9||Check Here|
|AMBOTHER 5-Function 48"/49" Truck Tailgate Side Bed Light Strip Bar||4.9||Check Here|
|Partsam 48" Truck Tailgate Red/White LED Light Bar||4.8||Check Here|
|Nilight TR-01 Truck Tailgate Bar 60" 108 LED Strip with Red Brake||4.8||Check Here|
Top 7 Best Tailgate Light Bars Review
1. OPT7 60″ Redline Triple LED Tailgate Light Bar
OPT7 60″ Redline Triple LED Tailgate Light Bar is another powerful light bar in the market. The 1,200 LED lights light up in an attractive way. This is a unique beam. The sequel to Amber’s “Mustang-style” doesn’t feel comfortable taking turns as soon as it receives a signal. It must be operated with the COMMAND ATTENTION option turned on. It is very easy to use. Just have to press the N button, the rest of the work will do the heavy-duty 25lb-rated adhesive thing.
There is no drilling needed for it. It’s a weatherproof -20F rated rigid aluminum frame. It also prevents rust and water. It is also a lifelong product. Its “OPT7 Module”; BLIS and blind spot sensor may require for hard-wiring. If the hard-wire is including inside the vehicle, then the triple LED tailgate should be set on the taillights of the vehicle with the extension kit.
- 1200 LEDs integrated light bar for a powerful light
- Just plug and play system made it more simple and reliable
- Water-resistant and rustproof
- No drills required
- Sequential turn signal made it unique
Sometimes LEDs burning out
2. Tailgate Light Bar, DJI 4X4 60 Inch QUAD Row Truck Bed LED Strip
This Tailgate Light Bar has an advanced featured 624 pc 2835 SMD LED with a 60-inch Quad Row LED light strip. This makes the lumen and the output 400% brighter than normal tailgate light. Its 156 red + 156 amber + 321 white LEDs create full-size signals by extension. Its ultra-bright triple color design helps ensure driver safety on the road. It usually uses red lights (other colors are used as well). It has an exceptional left amber LED lighted turn signal, also has the exception of the right red LED lighted turn signal.
Reverse LED light lights to give white light. It warns everyone in the back and helps prevent accidents. This light bars help to Wake up besides driver and reduce accidents in bad weather. Manufacturers have made it from housing to fully sealed flexible silicone that is IP67 waterproof. It is a durable tailgate light that also works properly in the rain, snow, and other natural disasters. The epoxy process is designed to refuse its lifespan if it is more than 30,000 hours. Its in-line fuse protects from short circuits. Easy Installation – This is a “no-drill” mounting system. This is the Superior Standard and has 4-pin flat plugs.
It’s a self-adhesive Genuine 3M tape that is easily able to stick to a smooth surface. No screw and no drill needed for install it so very easy to install it just plug and play module. The working voltage of 12V, strip light of the 60’S is rich in Amber Turning Vehicle. Such as Dodge Ram 1500 2500 3500 4500, Chevy Silverado, GMC Sierra, Toyota Tundra, and most cars, trucks, pickups, SUVs, RVs, vans, trailers, etc. do not fit the F-150. Its package includes 1Pcs LED Bed Strip Light, Mounting Parts. It has a manual for the benefit of the users.
- 400% brighter than others by 3 types of LEDs
- New 60 inches’ Quad row LED strips
- Bad weather adjustable for 5 different full functions
- Waterproof premium quality design
- Simple installation without drilling or screws
For long time use, slowly some LED may burn out
3. OPT7 48″ Redline Triple LED Tailgate Light Bar w/Sequential Amber Turn Signal
This is one of the most powerful tailgate light bars. 780 LEDs made powerful lighting. It is a unique beam rich and it gives attractive light. The sequel to Amber’s “Mustang-style” doesn’t feel comfortable taking turns as soon as it receives a signal. It must be operated with the command attention option turned on.
OPT7 48″ Redline Triple LED Tailgate Light Bar is very easy to use. Just have to press the N button, the rest of the work will do the heavy-duty 25lb-rated adhesive thing. There is no drilling in it. It’s a weatherproof -20F rated rigid aluminum frame. It also prevents rust and water. Its “OPT7 Module”; BLIS and blind spot sensor may require for hard-wiring. If the hard-wire is including inside the vehicle, then the triple LED tailgate should be set on the taillights of the vehicle with the extension kit. This Tailgate LED Light is effective and good for long time use. It is in great demand for car drivers.
- Powerful light bars by 780 LEDs
- Sequential turning style keep attention to others driver
- No drills required for installation
- Fully rust-free and waterproof
- Heavy-duty 25-lbs rated
Price of these lights bars is high than others
4. MICTUNING 60 Inch 2-Row LED Truck Tailgate Light Bar Strip
MICTUNING light bar is capable of giving more brightness than single-row lights. It has a dual row LED light strip (120 red and 60 white). All its lights are red and all the lights are white. The lights on the left side and the right side are red in color. It offers up to 30% brighter light than single-row tailgate lights. Powered by 12V, this flexible light strip lasts up to 60 inches long. In most cases, it is suitable for pickup trucks, trailers, cars, SUVs, RVs, vans, etc. Its fitness is extremely strong.
MICTUNING 60 Inch 2-Row LED Truck Tailgate Light Bar
has some special features such as running light, brake light, Reverse Light, and turn signal light (L / R). This increases visibility and ensures adequate safety while driving. IPX67 waterproof silicone housing with inline fuse is used to protect it from a short circuit. The top-grade LED chipsets adopted in it have been used. It can carry heavy tariffs. It’s super durable and solid. Usually, it has a running life of 100,000 hours. It has a superb standard 4-pin flat plug and self-adhesive tape.
This light bar can easily be stuck on a smooth surface. It can be easily installed with no screws. The gray wire is to be applied to the ground, white wire to the lamp, yellow wire to the left turn signal (scanned from left to center) and brake light to be connected. The green wire is required for the right side turn signal (scanned from right to center). The red wire is required for brake lights and reverses lights. Finally, the plug is on and it has to be turned on. If you have trouble installing it then read the company manual.
- Two-row light so 30X powerful
- Fit with maximum models of pickup trucks, trailers, Cars etc.
- Running, brake, signal, reverse and all function light available
- Short circuit protection system by an inline fuse
- Different wire for variant function
Needles may not setup all vehicle
5. AMBOTHER 5-Function 48″/49″ Truck Tailgate Side Bed Light Strip Bar
AMBOTHER tailgate light bar has 72-LED Korean 3528 SMD led chip and a Red X48 LED / white X24 LED. It awakens the drunkards and textures in the back. Its bright light protects against any kind of accident. All Red LED Lights signal back to the left side. The red LEDs on the left have lights. The rear gives the turn signal to the right. On the right are red LED lights. The brakes work on all the red color LED lights. Rubber is used to make the lights. This is a waterproof IP67, also works well during rain and snow.
It is able to withstand bad weather. It can be easily mounted with high-quality automotive adhesive. Trailer lights need to be plugged in. Its cables also work properly in the air (the reverse light must be wired). The 48 “/ 49” length strip bar should fit in the middle of the bottom of the tailgate and rear bumper.
- Variant super bright LEDs waking up driver besides your truck
- Full function tail light bar
- Waterproof rubber will work fine in snow or rain
- Easy install with easy mounting
- Highly compatible by length
Reverse light wearing is a little tough
6. Partsam 48″ Truck Tailgate Red/White LED Light Bar
This is the Partsum Super Bright 2835-72LEDs (48 Red LEDs + 24 White LEDs) lights. It gives 30% more bright light than usual. This rig works the same way day or night. It also ensures that there is a distant road that can be seen even in dense traffic. It is made of long-lasting and top-grade flexible material. Used to make it are GMC C / K 1500 2500 3500, Ford f150 f250, Chevy Silverado, GMC Sierra, Dodge Ram 1500-5500, and Toyota Tundra.
This light bars support in most cars such as trucks, pickups, SUVs, RVs, vans, trailers. It is very useful and safe for vehicles. The Parts Tailgate light bar is made with a durable rust-resistant and flexible strip. It is filled with IP67 watertight silicone. It also works well in rainfall, snowfall, or -20 Fahrenheit weather. Turn lights have red lights, parking brakes, and taillights, white lights for the reverse light. This helps to provide better visibility and protection for vehicles on the road. It needs to be just peeled and stuck using Self-Adhesive genuine 3M tape. 4 screws and 2 clips you can use for safe installation. If you are having any problems installing it then read the company manual well.
- Multi-function tailgate light bars
- Waterproof design with IP67 Silicone
- 2835 LEDs with 122CM length
- All in one package so easy to install
- Very cold weather compatible
After got water, it blinks two sides at the same time
7. Nilight TR-01 Truck Tailgate Bar 60″ 108 LED Strip with Red Brake
This Redline LED tailgate bar has 108 LED lights. It gives 35% brighter than ordinary chips. This light provides the same amount of light day and night. It also helps to ensure the view of distant roads in dense traffic. It has IP67 sealed housing. LED strips also protect against rainwater, snowflakes, dirt, and sand. It’s super durable and works well in any adverse weather. It can last up to 30,000 hours. No need to drill it. Adhesive with strong nails that increases hold strength over 5X.
Nilight TR-01 Truck Tailgate Bar will not be worn with nails. Even more secure. If needed, it should include mounting hardware for installation. It is mounted with a 12V power source. It has 60 “LED strips and is rated 12V. You can use it for very long cargo / pickup / camper / garage / RV, etc. It is also used for home party decoration. This is the standard track bed light for DIY, RV awning light, step bar LED lighting, side door led lamp, pickup bed light kit, etc. It is widely used for jeeps, pickups, trucks, RVs, SUVs. It is much more durable, so demand is increasing day by day.
- This light bars visible your vehicle in dense traffic at night or day
- Durable well protected LED strips include
- No screws and drill required
- Easily mounted anywhere by the fixed power source
- Multiple vehicle use
Wearing connection, not in the center
How to Buy Best Tailgate Light Bars – Buying Guide
Many people do not consider installing best tailgate light bars before buying them. We would like to advise you to pay close attention to the aspects related to light installation. Just as you seriously install towing tools, you also need to install tailgate lights. All light bars have a four-pin connector, which can be connected to towing tools. Each plug indicates its slot. If you can’t do the installation, read the company’s manual. Most manufacturers provide this guide with the light bar when selling it.
Objective to Use
The tailgate light bar is usually installed between the bumper and the tailgate on the rear of the vehicle. This helps to make the car more visible. When making these bars the manufacturers used it against adverse weather conditions made as a resistant item. Even in rain and snow, these lights ensure the visibility of the vehicle on the road. If these lights are attached to the pickup truck or SUV, the car can be driven to other countries. Make sure the light bar is protective. If you have a tailgate light bar in the car, you will be able to drive in salt, dirt, sand, etc.
Water Resistant Tailgate Lights
If the light is not waterproof, it will be damaged when it comes in contact with water. The light will not work in rain or snow, it will be out of order. If the light is waterproof, you can use it for a long time. The best light bar should have at least one IP67 rated LED chips. Then dust, water, snow, and other such natural disasters can do no harm to it. If the light is purchased for driving in cold regions. Among other features, the light should be able to withstand freezing temperatures. If the light is waterproof, you can drive safely in all areas. Before buying best tailgate light bars, it is necessary to check whether the product is waterproof.
Length of Light Bars
The length of the tailgate light bars is usually 48-60 inches. You need to measure the back of your car before buying lights. If you don’t buy the right size light, it will not be set in your car. If the light is not the right size, it will not be possible to install. Keep in mind that this light should be placed between the tailgate and the rear bumper, this is the right place to install the tailgate light.
Strength & Durability
High-quality products are durable and longer lasting. Tailgate light bars remains to be seen how long it will give light. It is important to note that the light is made of strong materials. It should have a strong and stable structure in construction, it helps to drive on rough roads. The effectiveness of the lights needs to be thoroughly verified. Before buying lights, you must see that they are durable and long-lasting.
You should choose the best tailgate light bars after check how clear and brighter lights it provides. Ensure your light bar throw enough shiny light and it can save you from thrusting by other vehicles. Choose strip light to keep safe and clear light in different weather like foggy or rainy. Check durability, installation process, and water resistance when you decided to buy a tailgate light bar for your favorite pickup truck. We recommended market top tailgate light bars for our visitors.
Read More: Best Jeep Wrangler LED Headlights